Seamax Ocean380T 12.5 Feet Commercial Grade Inflatable Boat, 5 Pontoon Chambers, Aluminum Floor, V Bottom, Max Support 25HP Motor, Coast Guard Standard Reflective Tapes, Multi-Purpose

Seamax Ocean380T Spec: Overall length 12.5ft, beam 5.7ft, inner dimensions L9.0ft x W2.8ft; Boat dry weight 210Lbs, carry 5 passengers, max loading 1432Lbs; Pontoon diameter 17.5 inches, 5 pontoon chambers and 1 keel chamber, Chambers with Hypalon type 4 layers overlapped seam, max pressure 3.6PSI (25kPa); Aluminum floor & reinforced V bottom; Short shaft 16″/ 82° & reinforced transom, Max 25HP motor, suggested 15-20HP.
Manufacturing Standard: Commercial grade boat fabric for main construction; Four layers overlapped chamber seam structure (Feature Code: FOS); Keel Center Inner Reinforcement (KCR); Transom Stabilizer & Reinforcement Design (TSR); Hull Stabilizer Bar Structure (HSBS); Seamax special feature also including: Dual Heavy duty life lines; Heavy duty boat bumper around the boat and bottom; Heavy duty D-Ring & Towing Ring patches.
Features: Non-skid sectional aluminum floor system with side joiners, Fuel tank and battery box tie down fitting on the floor, Dual motor pads and heavy duty pontoon towing rings; Transom to pontoon adapter fully reinforced, marine sealant is applied which resists leakage. Multiple D-ring kits installed on the inside of the pontoons, 3 x front towing rings with tow line; Full size towing rings on transom, 4 x heavy duty handles, Oar lock set installed, 2 position seat receiver.

Description

SEAMAX OCEAN380T SPECIAL FEATURES 1

4 layers overlap seam finishing is the strongest seam construction Same old within the inflatable boat industry. The 2 main chamber fabrics are real-bonded in conjunction with ½” overlapping. Extra seam tapes on both sides of chamber to improve the principle seam. Overall thickness of the 4-layers chamber seam is 5mm in total. Our chamber seam technology can provide the boat a double life time comparing with many others.

SEAMAX OCEAN380T SPECIAL FEATURES 2

Seamax all the time specializes in high manufacturing standards. A rigid transom is essential for inflatable boats. Beside the use of solid birch plywood to build transom, we develop a new Same old referred to as Transom Stabilizer Reinforcement (TSR). TSR will lend a hand the pontoon disperse motor vibration and weight. The reinforcement technology will extend the whole life time of the inflatable boat.

SEAMAX OCEAN380T SPECIAL FEATURES 3

Hull Stabilizer Bar (HSB) is designed by Seamax and first applied in an 18ft government boat project. Now Seamax HSB 2nd version is to be had on each Seamax Ocean T model. Positioned near the front deep V-Hull, the specially made HSB greatly helps stabilize the boat structure. The stress along the HSB creates an invisible force triangle to stabilize the front Hull and keep the ground in place. This kind of triangle inner toughen for the hull is a brilliant boat add-on feature. Also, a boat with HSB will have to have better high speed boating performance.

Seamax Ocean380T Spec: Overall length 12.5ft, beam 5.7ft, inner dimensions L9.0ft x W2.8ft; Boat dry weight 210Lbs, carry 5 passengers, max loading 1432Lbs; Pontoon diameter 17.5 inches, 5 pontoon chambers and 1 keel chamber, Chambers with Hypalon type 4 layers overlapped seam, max pressure 3.6PSI (25kPa); Aluminum floor & reinforced V bottom; Short shaft 16″/ 82° & reinforced transom, Max 25HP motor, suggested 15-20HP.
Manufacturing Same old: Commercial grade boat fabric for main construction; Four layers overlapped chamber seam structure (Feature Code: FOS); Keel Center Inner Reinforcement (KCR); Transom Stabilizer & Reinforcement Design (TSR); Hull Stabilizer Bar Structure (HSBS); Seamax special feature also including: Dual Heavy duty life lines; Heavy duty boat bumper across the boat and bottom; Heavy duty D-Ring & Towing Ring patches.
Features: Non-skid sectional aluminum floor system with side joiners, Fuel tank and battery box tie down fitting at the floor, Dual motor pads and heavy duty pontoon towing rings; Transom to pontoon adapter fully reinforced, marine sealant is applied which resists leakage. A couple of D-ring kits installed at the inside of the pontoons, 3 x front towing rings with tow line; Full size towing rings on transom, 4 x heavy duty handles, Oar lock set installed, 2 position seat receiver.
Accessories: 2 aluminum bench seats, 2 aluminum oars, 2 heavy duty boat carrying bags (for hull & floorboard); foot pump, boat repair kit & spare parts. Reflective Plates (optional) – US Coast Guard Approved 3M Reflective Sheeting; Color Code: White USCGFP30 (Sliver); Dimension 3″x10″ / 5Pcs.
Seamax is a dedicated manufacturer of Seamax inflatable boats. The Ocean-T series is our most sensible of the road model. It’s the very best inflatable boat for military, rescue and commercial applications, also offer great performance for recreational use & great value for the cash.

Reviews

There are no reviews yet.

Be the first to review “Seamax Ocean380T 12.5 Feet Commercial Grade Inflatable Boat, 5 Pontoon Chambers, Aluminum Floor, V Bottom, Max Support 25HP Motor, Coast Guard Standard Reflective Tapes, Multi-Purpose”

Your email address will not be published. Required fields are marked *